ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 122)

110 AT Command Set Reference
Command Options Function & Description Ref.
A> Re-execute the last command once
or repeat the last call up to 9 times.
(See also S8)
Terminate current connection
attempt when enter in handshaking
state.
+++ Escape sequence code, entered in
data state, wait for TA to return to
command state.
All the Following Commands Require a “AT” Prefix
A
Go on-line in answer mode. (See
also S39.2, S43.6)
ATA Return to command state.
ATABn B1 Set B1 for leased line in answer
mode.
B2 Set B2 for leased line in answer
mode.
B3 Set B1 & B2 for leased line in
answer mode.
Bnn Select ISDN Teleservice
'B' must be followed by two digits. S82
S102
B0n X.75
B00 X.75 Transparent
B01 X.75 T.70
B04 BTX (Data X-J)
B10 V.110 user rate follows DTE speed
(async.) or V.110 user rate
determined by in-band negotiation
(sync.)
B11 V.110 user rate = 64000 bps (sync
mode). S117
B13 V.110 user rate = 2400 bps.
B14 V.110 user rate = 4800 bps.
B15 V.110 user rate = 9600 bps.