ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 100)

88 Advanced ISDN Call Control
[FM:[[Prefix]Calling-Party-Number][/Subaddress/]]
[TO:[Called-Party-Number][/Subaddress/]]
RING
RING
......
The display of address information between the first RING and the
second RING can be disabled by setting ATS84.4=1. The term
[Prefix] is a predefined number string to be added in front of the
Calling-party-number before sending it to the DTE. This is useful for
some automatic dial-back-up systems. The number string can be
assigned as follows:
• ATCI<Prefix> - When and only when the type-of-number
denotes an international number will this "Prefix" be added to the
Calling-party-number before indicating it to the DTE.
•
ATCI<> - Disables the international number prefix-adding
function. (Default)
•
ATCN<Prefix> - When and only when the type-of-number
denotes a national number will this "Prefix" be added to the
Calling-party-number before indicating it to the DTE.
•
ATCN<> - Disable the national number prefix-adding function.
(Default)
O NOTE
: The angle brackets '<' and '>' are part of this command.
Disable inbound call connection
In some cases, the user may desire the TA to not answer any
incoming calls. This can be done by setting the bit 0 of S-register
S118:
•
S118.0=0 - Enable the TA to answer a call (by default).
•
S118.0=1 - Disable the TA to answer any call.