ZyXEL Communications V501-T1 - Manual (Page 80)

Chapter 6 LCD Menus: Basic Settings
V500 Series User’s Guide
80
6.3.3 VoIP Status
Use this screen to check the SIP number associated with each VoIP account configured on the
V500, and to see whether an account is correctly registered with a SIP server. Select VoIP
Status in the System Info menu. The following screen displays.
Figure 26 LCD Menu: VoIP Status
The following table describes the labels in this screen.
Gateway This is the IP address of the device on the network your V500 uses to
access the Internet.
DNS1 This is the primary DNS (Domain Name System) server your V500 uses.
DNS2 This is the secondary (backup) DNS server your V500 uses.
MAC This is your V500’s Media Access Control Address.
Back Press this to return to the previous screen.
Table 9 LCD Menu: IP Address
LABEL DESCRIPTION
VoIP Status
SIP 1: Registered
MyAccount / 1234
SIP 2: No Reg
MyAccount2 / 5678
SIP 3: N/A
SIP 4: N/A
Back
Table 10 LCD Menu: VoIP Status
LABEL DESCRIPTION
SIP 1 ~ 4 These are the VoIP accounts configured on the V500. An account must be
registered to make and receive calls, and must be active before the V500
tries to register it.
•
If an account is active and registered, Registered displays. The
account name and number appear below.
• If an account is active but has not registered, No Reg displays. The
account name and number appear below.
• If an account is not active, N/A displays.
Back Press this to return to the previous screen.