ZyXEL Communications V501-T1 - Manual (Page 111)

Chapter 7 LCD Menus: Advanced
V500 Series User’s Guide
111
The following table describes the labels in this screen.
7.3.2.2 Default Gateway
Enable and select Advanced Setting > Network Setting > Static IP > Default Gateway. The
following screen displays.
Figure 62 LCD Menu: Default Gateway
The following table describes the labels in this screen.
Table 39 LCD Menu: IP Address - Edit
LABEL DESCRIPTION
Current This is the static IP address currently configured on the V500.
New Enter the static IP address you want the V500 to use in dotted decimal
notation.
Mode Cycle through different character input modes using the # key.
Save Press this to save your changes.
. Press this to enter a period.
<- Press this to delete a character.
Cancel Press this to return to the previous screen without saving your settings.
Static Gateway
Current: 192.168.1.254
Edit Back
Table 40 LCD Menu: Default Gateway
LABEL DESCRIPTION
Current This is the static IP address of the device your V500 uses to access the
Internet.
Edit Press this to enter a different static gateway IP address.
Back Press this to return to the previous screen.