ZyXEL Communications V501-T1 - Manual (Page 156)

Chapter 7 LCD Menus: Advanced
V500 Series User’s Guide
156
7.8.1 PBX Mode
Use this menu to configure the PBX mode settings. PBX mode should be selected if your
phone connection is routed through a ZyXEL IP PBX (such as the X2002), or another IP-PBX.
The settings here are automatically configured using auto-provisioning if routed through a
ZyXEL device; otherwise, you may have to configure these settings manually.
Figure 121 LCD Menu: Call Feature Mode
The following table describes the labels in this screen.
Call Feature Mode
CallTRF:
DNDOff:
DNDOn:
Paging:
Voicemail:
Apply * <- Back
Table 96 LCD Menu: Contrast
LABEL DESCRIPTION
CallTRF Enter the feature code key for call transfer mode.
DNDOff Enter the feature code key that turns Do Not Disturb off.
DNDOn Enter the feature code key that turns Do Not Disturb On
Paging Enter a list of paging numbers, separated by commas. You can enter up to
a maximum of 127 digits and characters.
Voicemail Enter the feature code you used to access your voicemail from this phone.
Apply Press this to save your settings.
* Enter an asterisk in a Key line.
<- Press this to delete a character.
Back Press this to return to the previous screen.