ZyXEL Communications V501-T1 - Manual (Page 114)

Chapter 7 LCD Menus: Advanced
V500 Series User’s Guide
114
The following table describes the labels in this screen.
7.3.2.4 First and Second DNS Servers
Use these screens to enter the IP address(es) of DNS (Domain Name System) servers on your
network. Use 1st DNS for the primary (main) server, and use 2nd DNS if you have
information about a secondary (backup) server.
Enable and select 1st DNS or 2nd DNS in the Advanced Setting > Network Setting > Static
IP menu. A screen similar to the following displays (this example uses the 1st DNS screen).
Figure 66 LCD Menu: First / Second DNS
The following table describes the labels in this screen.
Table 43 LCD Menu: Subnet Mask - Edit
LABEL DESCRIPTION
Current This is the subnet mask your V500 is configured to use.
New Enter the new subnet mask in dotted decimal notation.
Mode Cycle through different character input modes using the # key.
Save Press this to save your changes.
. Press this to enter a period.
<- Press this to delete a character.
Cancel Press this to return to the previous screen without saving your settings.
1st DNS
Current: 0.0.0.0
Edit Back
Table 44 LCD Menu: First / Second DNS
LABEL DESCRIPTION
Current This is the IP address of the DNS server already configured on the V500.
Edit Press this to enter a different DNS server IP address.
Back Press this to return to the previous screen.