ZyXEL Communications V501-T1 - Manual (Page 107)

Chapter 7 LCD Menus: Advanced
V500 Series User’s Guide
107
The following table describes the labels in this screen.
7.3.1.2 PPPoE Password
Enable and select Advanced Setting > Network Setting > PPPoE > Password. The
following screen displays.
Figure 57 LCD Menu: PPPoE Password
The following table describes the labels in this screen.
Table 34 LCD Menu: PPPoE Username - Edit
LABEL DESCRIPTION
Current This is the static IP address currently configured on the V500.
New Enter the static IP address you want the V500 to use in dotted decimal
notation.
Mode Cycle through different character input modes using the # key.
Save Press this to save your changes.
<- Press this to delete a character.
Cancel Press this to return to the previous screen without saving your settings.
PPPoE Password
Current: ****
Edit Back
Table 35 LCD Menu: PPPoE Password
LABEL DESCRIPTION
Current Each asterisk (*) represents one character of the PPPoE password
configured on the V500.
Edit Press this to enter a different PPPoE password.
Back Press this to return to the previous screen.