ZyXEL Communications V501-T1 - Manual (Page 48)

Chapter 3 Tutorials
V500 Series User’s Guide
48
3.3.1 Configuring VoIP Options Manually
If your phone network does not use or support automatic configuration through auto
provisioning, then you must configure the V500’s voice server settings yourself.
The essential settings you need to establish a VoIP connection are:
To configure your VoIP settings:
1 Open the MENU > Advanced > SIP Configuration screen and select one of four
available account slots. (You may be prompted to enter the administrator password. The
default is “1234”.)
SETTING TUTORIAL VALUE NOTES
Display Name Michael This is your name as it will appear on the
V500’s LCD screen and which is associated
with this phone extension and SIP server
information. Other users receiving calls
placed by you may also see this name on
their own devices, depending on your
particular SIP server.
SIP Number 1001 This is your IP phone number or extension.
Not all network admins or service providers
necessarily use the same term for it; for
example, some admins may instead call it the
VoIP number.
SIP Server Address 172.23.10.10 This is the IP address of the SIP server that
the V500 uses to communicate with other
phones and devices.
SIP Register Server 172.23.10.10 This is the service registration server’s IP
address. Usually, this value is identical to the
SIP Server Address. Even though it is the
same, it is still required.
SIP Authentication ID mscott This is the SIP login ID that is associated with
this phone. It must provided for
authentication.
SIP Authentication
Password Customization
1234 This is the SIP login password that is
associated with this phone. It must provided
for authentication.
SIP Configuration
1 VoIP 1 Config. (On)
2 VoIP 2 Config. (Off)
3 VoIP 3 Config. (Off)
4 VoIP 4 Config. (Off)
Select On Off Back