ZyXEL Communications V501-T1 - Manual (Page 62)

Chapter 4 Using the LCD Screen
V500 Series User’s Guide
62
The following table describes the navigation pad features.
4.3 The Keypad
The keypad is also a very important part of working with the V500’s LCD screens. It allows
you to make selections based on list postion (for example, pressing the 1 key to select item
number 1 in the menu) and enter important information into the fields that require it (such as
your user name and password).
Figure 8 The V500 Keypad
The following table describes the keypad features.
FEATURE DESCRIPTION
Softkeys These keys’ functions depend on the screen currently displayed on the LCD
screen. A word or symbol displayed on the LCD screen above a softkey
shows its current function.
Menu Press this to display the V500’s configuration menu. Press it again to exit
the menu. The menu is not accessible when a call is in progress.
Navigator Press these keys to move around the V500’s screens. Press to go up
one line in a menu, and press to go down one line. Press to move
one space to the right, and press to move one space to the left. You can
also press
to make a menu selection, and press to return to the
previous menu.
FEATURE DESCRIPTION
Alphanumeric
keypad Use these to enter numbers, letters and symbols. Use the # key to switch
between Number mode, Uppercase mode, Lowercase mode and Symbol
mode. Enter a menu item’s number to jump to that item (single-digit
numbers only).