D-Link DFL-2500 - Manual (Page 299)

12.2. ZoneDefense Switches
Switch information regarding every switch that is to be controlled by the firewall has to be manually
specified in the firewall configuration. The information needed in order to control a switch includes:
• The IP address of the management interface of the switch
• The switch model type
• The SNMP community string (write access)
The ZoneDefense feature currently supports the following switches:
• D-Link DES 3226S (minimum firmware: R4.02-B14)
• D-Link DES 3250TG (minimum firmware: R3.00-B09)
• D-Link DES 3326S (minimum firmware: R4.01-B39)
• D-Link DES 3350SR (minimum firmware: R1.02.035)
• D-Link DES 3526 (minimum firmware: R3.01-B23)
• D-Link DES 3550 (minimum firmware: R3.01-B23)
• D-Link DGS 3324SR (minimum firmware: R4.10-B15)
Note
Make sure that the switches have the minimum required firmware versions before
activating ZoneDefense.
12.2. ZoneDefense Switches Chapter 12. ZoneDefense
299