Transparent mode scenarios chapter 4. routing 125 – D-Link DFL-2500 User Manual
Page 125
3.
Click OK
4.
Go to Rules > IP Rules > Add > IPRule
5.
Now enter:
•
Name: HTTP-WAN-to-DMZ
•
Action: SAT
•
Service: http
•
Source Interface: wan
•
Destination Interface: dmz
•
Source Network: all-nets
•
Destination Network: wan_ip
•
Translate: Select Destination IP
•
New IP Address: 10.1.4.10
6.
Click OK
7.
Go to Rules > IP Rules > Add > IPRule
8.
Now enter:
•
Name: HTTP-WAN-to-DMZ
•
Action: Allow
•
Service: http
•
Source Interface: wan
•
Destination Interface: dmz
•
Source Network: all-nets
•
Destination Network: wan_ip
9.
Click OK
4.6.6. Transparent Mode Scenarios
Chapter 4. Routing
125