2080 pixel rate too low, 2090 horizontal total not even, 2130 horizontal active too small – Quantum Data 801GC User Manual
Page 316: 2140 horizontal blanking too small, 2141 horizontal blanking too small, 2150 horizontal blanking too small
8-8
Chapter 8: Error Messages
Model 801GC, 801GF & 801GX¥Rev. A
2080
Pixel rate too low
The pixel rate is below the minimum rate supported by the
generator.
■
Increase the value of HTOT.
■
Increase the value of HRAT.
2090
Horizontal total not even
The generator does not support an odd number of total
pixels per scan line.
■
Make the horizontal period (in pixels) an even number.
2091
Horizontal total must be multiple of 4 at pixel
rate
The generator does not support horizontal pixel totals (active
+ blanking) that cannot be evenly divided by four (4) at the
given pixel rate.
■
Make the total horizontal pixels per line to be evenly
divisible by 4.
■
Decrease the pixel rate.
2130
Horizontal active too small
The number of active pixels per horizontal scan line is below
the minimum supported by the generator.
■
Increase the horizontal active pixels.
2140
Horizontal blanking too small
The number of blanked pixels per horizontal scan line is
below the minimum supported by the generator.
■
Increase the horizontal period (in pixels).
■
Decrease horizontal active (in pixels).
2141
Horizontal blanking too small
The number of blanked pixels per horizontal scan line (HTOT
- HRES) is below the minimum supported by the generator.
■
Increase the horizontal period (in pixels).
■
Decrease horizontal active (in pixels).
2150
Horizontal blanking too small
The number of blanked pixels per horizontal scan line (HTOT
- HRES) is below the minimum supported by the generator.
■
Increase the horizontal period (in pixels).
■
Decrease horizontal active (in pixels).