Oki C 9400 - Manual (Page 433)

3. Attach the other end of the cable to the parallel port on the computer and secure it in
place with the screws.
Parallel Cable Requirements
FCC: To comply with FCC regulations, the cable must be shielded with twisted pair
conductors, and must be UL and CSA approved.
Length: Maximum length for standard bidirectional cable is 6 feet (1.8 meters). The
standard parallel cables available at computer stores should work fine. For extended
distances, higher quality IEEE 1284-compliant cables are available.
Connector: Printer connector is IEEE 1284-B receptacle (36 pins, 0.085" center line).
Port: Port supports bidirectional IEEE 1284 communications (compatibility, nibble, and
ECP modes).
Standard Parallel Port Menu Settings
Item Default Setting
432