Oki C 9400 - Manual (Page 114)

To change it to always be PCL ® or Adobe ® PostScript ® :
1. Press MENU repeatedly until SYSTEM CONFIG MENU appears on the display.
2. Press ITEM + repeatedly until PERSONALITY appears on the display.
3. Press VALUE + repeatedly until the setting you wish to engage appears on the second
line of the display.
4. Press SELECT.
An Asterisk (*) appears next to the new setting.
5. Press ON LINE to save the setting and exit the menu.
Turning the Duplex Unit On in the Menu
To turn duplex printing on in the printer menu:
1. Press MENU several times until PRINT MENU appears on the display.
2. Press ITEM + several times until DUPLEX appears on the display.
3. Press VALUE + once to change the setting from OFF to ON.
4. Press SELECT to engage the new setting.
An asterisk will appear at the end of the second line.
5. Press ON LINE to save the setting and exit the menu.
Control Panel Display Language
113