Omega Vehicle Security OMP-MODL - Manual (Page 213)

11.. . A PPENDIX A: M ASTER I CON R EFERENCE
U SING THE OMP-MODL 11-51
INPUTS:
Data/Logic Signal: Data type.
Update Clock: None
Enable: Processing of icon is allowed when Enable pin is unconnected or
when connected and Enable signal is TRUE.
OUTPUTS:
Output Signal: Data type. The Average icon updates its output after receiving and
averaging the User specified number of readings.
ICON CONFIGURATION DIALOG BOX:
CONFIGURATION OPTIONS:
Icon Name: Specify the label for the icon. This name will show directly under the icon
within the Program Net.
Input Name: In this box, HyperNet displays the Output Name of the icon connected to
this icon’s Input. The Output Name can be changed in the other icon’s
dialog.
Conventional/Sliding: Select type of Averaging function to perform.
Number of Samples per Average: Specify the number of input readings to average
before outputting.
Output current Average upon disable: Check this box to force an output of the in-
process average calculation at any time that the icon is disabled. If this
box is not checked, upon receipt of a disable signal, the Average
calculation will be momentarily suspended until the icon is re-enabled and
no in-process value will be output.
For example, if an average is to be calculated over 10 samples but only 7
have been averaged and the icon is disabled, the 7 sample average will be
output and the Average calculation will be suspended until re-enabled.
Upon re-enable, the calculation will continue and after 3 more samples are
received, the 10 sample average will be output (unless the following check
box is checked)