Roland RM-700 - Manual (Page 25)

26
Before You Start Playing
4. Use a USB cable to connect the CD drive’s USB connector
to the Ext Drive connector on the RM-700’s front bottom
panel.
5. Connect the AC adaptor included with the CD drive to the
CD drive’s DC IN jack.
6. Connect the AC adaptor to an AC outlet.
To prevent the inadvertent disruption of power to your unit
(should the plug be pulled out accidentally), and to avoid
applying undue stress to the AC adaptor jack, anchor the
power cord using the cord hook, as shown in the illustration.
You can experience three different demos that introduce the most
important functions.
1. While holding down the [V-LINK] button, press the
[Reverb] button.
The demo menu screen appears.
2. Touch the demo that you want to experience.
The demo image will appear in the RM-700’s display.
* If you touch < Play All > , the three demos will continue playing
consecutively until you press the [Exit] button.
3. To end the demo, press the [Exit] button.
• All rights reserved. Unauthorized use of this material for purposes
other than private, personal enjoyment is a violation of applicable
laws.
• You can set things so the Demo starts playing automatically. For
details, see “Automatically Starting the Demo (Auto Start)” (p. 187).
USB cable
AC adaptor
Power cord
To AC outlet
Cord hook
Place the AC adaptor so the side with the indicator (see illustration)
faces upwards and the side with textual information faces
downwards.
The indicator will light when you plug the AC adaptor into an AC
outlet.
Experiencing the RM-700 Demo
RM-700_e.book 26 ページ ２００９年３月１８日 水曜日 午前１１時５分