Roland RM-700 - Manual (Page 150)

151
Saving Your Performance Settings (User Program)
1. Press the [User Program] button so its indicator is lit.
The User Program selection screen appears.
2. Press one of the [1]–[5] buttons to recall the user
program that was stored at that button.
The current performance settings will change to the settings of the
selected user program.
* By touching , you can switch between screens without
recalling a user program.
3. Touch the name to select a variation for the user
program.
The current performance settings will change to the settings of the
selected user program.
* You can also use the [Value] dial to select variations.
* Information about which variation you’ve selected from the eight
that are available is stored to the [1]–[5] buttons.
You can take the 40 user programs saved to the [User Program]
button and save them as a set to a USB memory, or to user memory.
* If you want to save the user program set to USB memory, connect
your USB memory to the External Memory connector now.
1. Press the [User Program] button so its indicator is lit.
The User Program selection screen appears.
2. Touch .
The “User Program File Menu” screen appears.
3. Touch .
The “Save User Program” screen appears.
Giving a Name to a Set of User Programs
* If you don’t need to rename the user program, proceed to step 8.
4. Touch .
The “Rename” screen appears.
Calling Up Saved User Programs Saving the User Program Sets
RM-700_e.book 151 ページ ２００９年３月１８日 水曜日 午前１１時５分