Roland RM-700 - Manual (Page 117)

118
Using the Practice Functions
By setting markers at points in a song that you want to practice repeatedly, you can then easily go to and repeat play back of the
selected measures.
You can place two separate markers (Marker A and Marker B) in one song. These markers are placed at the beginning of a measure.
Placing markers is a handy way to start playback at the same place as many times as you like. You can add markers or move to a
marker even while playback is in progress.
1. Select the song in which you’ll set the markers (p. 75).
2. Press the [Menu] button so its indicator is lit.
3. Touch .
* The Menu screen for Settings contains five screen pages. Touch to switch between the pages.
4. Touch .
The Marker screen appears.
You can also access the Marker screen by touching in the “Count” screen (p. 115).
Placing Markers
5. Go to the measure where you want to set a marker using the [ (Prev)] and [ (Next)] buttons.
The measure number shown in the upper part of the screen will change.
6. Touch <- - -> for Marker A.
Marker A is placed at the beginning of the measure you selected.
“- - -” on the screen will change to the number of the measure where you placed the marker.
7. In the same way, touch the Marker B <- - -> to set Marker B.
Marker B is placed.
* It is not possible to assign marker B to the same location or a measure before marker A.
Setting Markers for Repeated Practice (Marker)
Placing a Marker within a Song
RM-700_e.book 118 ページ ２００９年３月１８日 水曜日 午前１１時５分