Roland RM-700 - Manual (Page 183)

184
Various Settings
You set the Remote Sensor to On (active) or Off (disabled).
1. Press the [Menu] button so its indicator is lit.
2. Touch .
* The Menu screen for Settings contains five screen pages.
Touch to switch between the pages.
3. Touch .
The “Ir Function” screen appears.
4. Touch to switch On and Off.
If you touch , the currently selected setting
(parameter) will return to its factory setting.
5. Press the [Exit] button when you’ve finished making
settings.
1. Press the [Menu] button so its indicator is lit.
2. Touch .
* The Menu screen for Settings contains five screen pages.
Touch to switch between the pages.
3. Touch .
The “Remote Control” screen appears.
4. To change the setting, touch for the item you
want to specify.
If you touch , the currently selected setting
(parameter) will return to its factory setting.
5. Press the [Exit] button when you’ve finished making
settings.
Here you can select the function that is assigned to the remote’s
[ (Play/Stop)] button.
Switching the Remote Sensor On
and Off (Ir Function)
Setting Explanation
On Remote control function is enabled.
Off
Remote control function is disabled.
Remote control cannot be used,
Remote Control Settings
Changing the [Play/Stop] Button Functions
(Play Mode)
Display Explanation
One Song
Only the selected song is played back. Playback stops
when the song is finished.
All Song
Songs are played back continuously in sequence, starting
from the currently selected song.
Internal Song
Songs in the selected genre are played back continuously.
“Favorites” Songs
Songs registered to the “Favorites” are played back in
sequence.
Songs on USB Memory and CD
Songs within the selected folder are played back
continuously.
RM-700_e.book 184 ページ ２００９年３月１８日 水曜日 午前１１時５分