Roland RM-700 - Manual (Page 174)

175
Various Settings
1. Press the [Menu] button so its indicator is lit.
2. Touch .
* The Menu screen for Settings contains five screen pages.
Touch to switch between the pages.
3. Touch .
The “Vocal Effect” screen appears.
4. To change the setting, touch for the item you
want to specify.
* There are two setting screens. Touch to switch pages.
If you touch , the currently selected setting
(parameter) will return to its factory setting.
5. Press the [Exit] button when you’ve finished making
settings.
• For more about Effect Sw, Effect Type, and Harmony Level, refer to
“Adding Effects to Microphone Vocals (Vocal Effect)” (p. 86).
This setting lets you add a backing chorus to the harmony when
you’ve selected “Duet,” “Trio,” or “Quartet.”
1. Press the [Menu] button so its indicator is lit.
2. Touch .
* The Menu screen for Settings contains five screen pages.
Touch to switch between the pages.
3. Touch .
The “Equalizer” screen appears.
4. Touch a button from <1> through <4> to select an
equalizer number.
5. Touch a button from through to select the
frequency band for which you want to adjust the
settings.
6. To change the setting, touch for the item you
want to specify.
If you touch , the currently selected setting
(parameter) will be reset.
7. Press the [Exit] button when you’ve finished making
settings.
Vocal Effect Settings
Adding a Backing Chorus to the Harmony
(Backing Choir)
Setting Explanation
Off A backing chorus will not be added.
Gregorian, Gospel, Classical Choir, Boys choir
Adjusting the Volume of the Backing Choir
(Backing Choir Level)
Setting
1–10
Changing the Equalizer Settings
Parameter Setting Explanation
Equalizer
Number
1–4, OFF
Selects a set of preset equalizer settings.
If you select “OFF,” the equalizer will be
turned off.
Master Level -12–+12dB Adjusts the overall volume of the RM-700.
Low Freq.
16–16000
(Hz)
Frequency point in the low-frequency range.
Generally, this changes the level at and
below this frequency.
RM-700_e.book 175 ページ ２００９年３月１８日 水曜日 午前１１時５分