beautypg.com

Attaching the headphone hook, Connecting usb memory – Roland RM-700 User Manual

Page 22

background image

23

Before You Start Playing

Whenever you are not using the headphones, you can hang them

on the headphone hook of the RM-700.

1.

Press and twist the headphone hook included with the

RM-700 into the hole in the bottom left of the RM-700

(refer to the figure above).

2.

Turn the headphone hook wing nut to secure the

headphone hook.

• Do not hang anything other than headphones on the headphone

hook. Doing so may damage the instrument or the hook.

You can connect USB memory to the External Memory connector,

and play back songs that were saved on the USB memory. Songs

you’ve recorded on the RM-700 can also be saved to USB memory.

Use USB memory sold by Roland. We cannot guarantee

operation if any other USB memory is used.

1.

Press the External Memory connector cover and open the

cover.

Press the cover in; the cover will open.

2.

Connect the USB memory to the External Memory

connector.

Make sure that the memory is plugged in all the way. Do not

use excessive force.

3.

Press the cover in again to close the cover.

• Always keep the External Memory connector cover closed except

when connecting and disconnecting external memory.

Attaching the Headphone Hook

Wing nut

Headphone hook

Hole

Connecting USB Memory

RM-700_e.book 23 ページ 2009年3月18日 水曜日 午前11時5分