Roland RM-700 - Manual (Page 178)

179
Various Settings
You can assign a variety of functions to the left pedal, center pedal,
and expression pedal (sold separately). You can call up the assigned
functions just by pressing the corresponding pedal.
1. Press the [Menu] button so its indicator is lit.
2. Touch .
* The Menu screen for Settings contains five screen pages.
Touch to switch between the pages.
3. Touch .
The “Pedal” screen appears.
4. To change the setting, touch for the item you
want to specify.
If you touch , the currently selected setting
(parameter) will return to its factory setting.
5. Press the [Exit] button when you’ve finished making
settings.
• Pressing the One Touch Program [Piano] button restores the piano
performance functions to the pedals (p. 21).
Assigning the Function of the Pedals
(Left Pedal/Center Pedal/Expression Pedal)
Function Explanation
Leading Bass
Toggles the Leading Bass function (p. 55) on or off.
The function stays on as long as the pedal to which
this is assigned is pressed.
No Chord
Only the Rhythm part is played.
After No Chord is switched on, specifying a chord by
playing the actual keys cancels the function, and all of
the accompaniment parts are played.
Break
During the performance of Automatic
Accompaniment, the accompaniment stops for one
measure only.
Fill In A fill-in is inserted.
Intro/Ending
Performs the same function as the [Intro/Ending]
button (p. 63). Intro and Ending are played.
Rhythm Start/
Stop Performs the same function as the [Start/Stop] button
(p. 63).
Variation Up
Switches the Variation button. The Variation number
will increase each time you press the pedal.
Variation Down
Switches the Variation button. The Variation number
will decrease each time you press the pedal.
Harmony
Intelligence Turns the Harmony Intelligence function on and off
(p. 67).
Fade In/Out
This starts Automatic Accompaniment with a fade-in
(where the volume gets progressively louder), ends it
with a fade-out (where the volume gets progressively
softer), then stops.
Rotary Slow/
Fast This switches the speed of the rotary effect (p. 37)
when you perform with an organ tone.
Glide
While the pedal is held down, the pitch of the sound
drops temporarily, returning to the original pitch
when the pedal is released.
This can be effective for simulating the performance
of instruments like a Hawaiian guitar.
Composer Play/
Stop Performs the same function as the [ (Play/Stop)]
button (p. 75).
Page Fwd
The notation in the RM-700 display scrolls to the next
page when you press the pedal.
Page Bwd
If a song is stopped with the score shown in the
display, the notation in the RM-700 display scrolls to
the preceding page when you press the pedal.
Punch In/Out
During Punch-in Recording, this starts and stops
recording (p. 161).
Tap Tempo
You can set the tempo according to the interval at
which the pedal is pressed (p. 113).
Composer
Assist
Pressing the pedal during playback of a song stops
the playback.
When the pedal is released, playback resumes from
the beginning of the measure that was playing when
the pedal was pressed.
When the pedal is pressed in rapid succession, the
playback will resume backs up the same number of
measures as the number of times the pedal is pressed.
Upper
Sostenuto
The pedal functions as a sostenuto pedal (p. 21).
Upper Soft The pedal functions as a soft pedal (p. 21).
RM-700_e.book 179 ページ ２００９年３月１８日 水曜日 午前１１時５分