beautypg.com

Modifying the settings of each part, Modifying the settings of each part” (p. 157), If the following message appears – Roland RM-700 User Manual

Page 156

background image

157

Creating and Editing Songs

You can change the Tones and volume, as well as mute the

playback, for each individual part in songs recorded with the 16-

track Sequencer and the internal songs.

Because commercially available Roland SMF music files are also

made up of 16 Parts, you can change the settings for the

individual Parts and play them back in the same way.

* First, select the song for which the settings are to be made (p. 75).

1.

Display the 16-track Sequencer screen (p. 156).

2.

Touch the screen to choose the Part for which you want

to make settings.

Change the settings for the selected Part.

When you touch , a message asking you to confirm the

deletion appears. To erase the recorded sound, touch . If

you don’t want to erase the recorded sound, touch .

Once a performance has been erased, it can’t be restored.

You cannot touch during playback of the song.

3.

Touch to make more detailed settings for the

selected part.

The following screen appears.

• You can change the Tone for the selected Part by pressing a Tone

button while this screen is displayed. The Part name and tone name

are displayed at the top of the screen.

• When selecting Part 10 or 11, you can touch to select

the drum set or effect sound.

4.

Touch

for the corresponding item to change the

setting.

You can adjust the values by touching the desired parameter and

turning the dial or by touching and dragging the slider.

When you press the [

(Play/Stop)] button, you hear what the

song sounds like as you change the settings. When you press the

[

(Play/Stop)] button, playback of the song stops.

5.

Touch

to make settings for other parts.

The Part name appears at the upper part of the screen.

Change the settings for other parts as needed.

6.

Hold down the [

(Rec)] button and press the [

(Prev)] button.

This operation set the changes in the settings.

If you do not want to delete a song after changing the settings for

the individual parts, save the song to a USB memory or to user

memory (p. 134).

You cannot save the settings that determine whether sounds

for each individual part are played or not (solo and mute).

If the Following Message Appears

If you try to display another screen after you’ve changed the song’s

settings for each Part, a message like the one below may appear.

Touch to change the song’s settings.

Touch to discard the changes you’re made.

Modifying the Settings of Each Part

Display

Function

Only the selected Part is played back.

Toggles playback of the selected Part to on or off.

The performance data for the selected part is deleted.

Display

Explanation

Volume

Changes the volume level.

Reverb

Changes the amount of reverb effect applied to the sound.

Chorus

Changes the amount of chorus applied.

Panpot

Shifts the direction from which the sound is heard between
left and right.

Touch

to shift the sound to the right, or touch

to

shift it to the left.

RM-700_e.book 157 ページ 2009年3月18日 水曜日 午前11時5分