Roland RM-700 - Manual (Page 136)

137
Recording and Saving the Performance
5. Touch .
The [ (Play/Stop)] button will blink, and the RM-700 will enter recording-standby mode.
Start Recording
6. Press the [ (Play/Stop)] button.
When recording starts, the [ (Play/Stop)] and [ (Rec)] buttons’ indicators light up.
Stop Recording
7. Press the [ (Play/Stop)] button.
Recording will stop, and the “Rename” screen appears.
* If you don’t need to rename the song, proceed to step 10.
8. Touch to move the cursor.
9. Enter the desired characters.
10. When you’ve specified the desired name, touch .
The recorded song will be saved to USB memory.
Play Back the Recorded Performance
11. Press the [Song] button so its indicator is lit.
The Song selection screen appears.
12. Touch , and then select the song that you recorded.
13. Press the [ (Play/Stop)] button.
The recorded performance is played back.
When you press the [ (Play/Stop)] button, playback stops.
Icon Explanation
< ABC >–< YZ >
Enters a character at the cursor location.
For example, each time you touch the icon, the character to be entered will cycle in the order of A
→ B → C → A...
< A–0 > Switches between entering letters and numbers.
< Del > Delete the character at the cursor position.
RM-700_e.book 137 ページ ２００９年３月１８日 水曜日 午前１１時５分