Roland RM-700 - Manual (Page 216)

217
Effects List
Effect Type Explanation
Equalizer This is a four-band stereo equalizer (low, high).
Spectrum This is a stereo spectrum.
Enhancer Adds sparkle and tightness to the sound.
Isolator
Adds a special effect to the sound by cutting the volume
in varying ranges.
Low Boost
Boosts the volume of the lower range, creating powerful
lows.
High Pass Filter
This is a low-cut filter. It cuts the low-frequency
component.
Overdrive
Creates a soft distortion similar to that produced by
vacuum tube amplifiers.
Distortion Produces a more intense distortion than Overdrive.
Overdrive2 This is an overdrive that provides heavy distortion.
Distortion2 This is a distortion effect that provides heavy distortion.
Speaker
Simulator Simulates the speaker type and mic settings used to
record the speaker sound.
Guitar Amp
Simulator This is an effect that simulates the sound of a guitar
amplifier.
Phaser
A phase-shifted sound is added to the original sound and
modulated.
Multi Stage
Phaser Extremely high settings of the phase difference produce a
deep phaser effect.
Infinite Phaser
A phaser that continues raising/lowering the frequency at
which the sound is modulated.
Stereo Flanger
It produces a metallic resonance that rises and falls like a
jet airplane taking off or landing.
3D Flanger This applies a 3D effect to the flanger sound.
2Band Flanger
A flanger that lets you apply an effect independently to
the low-frequency and high-frequency ranges.
Auto Wah Cyclically controls a filter to create cyclic change in timbre.
Humanizer
Adds a vowel character to the sound, making it similar to
a human voice.
Ring Modulator
This is an effect that applies amplitude modulation (AM) to
the input signal, producing bell-like sounds.
Tremolo
Cyclically modulates the volume to add tremolo effect to
the sound.
Auto Pan Cyclically modulates the stereo location of the sound.
Slicer
By applying successive cuts to the sound, this effect turns
a conventional sound into a sound that appears to be
played as a backing phrase.
Compressor
Flattens out high levels and boosts low levels, smoothing
out fluctuations in volume.
Limiter
Compresses signals that exceed a specified volume level,
preventing distortion from occurring.
Stereo Chorus This is a stereo chorus.
Hexa Chorus
Uses a six-phase chorus (six layers of chorused sound) to
give richness and spatial spread to the sound.
Tremolo Chorus
This is a chorus effect with added Tremolo (cyclic
modulation of volume).
Space D Produces a transparent chorus effect.
3D Chorus This applies a 3D effect to the chorus sound.
2 Band Chorus
A chorus effect that lets you apply an effect independently
to the low-frequency and high-frequency ranges.
Rotary
The Rotary effect simulates the sound of the rotary
speakers often used with the electric organs of the past.
Rotary2
This type provides modified response for the rotary
speaker, with the low end boosted further.
Rotary Multi It comprises vibrato/chorus, overdrive, and rotary effects.
Stereo Delay1
This is a stereo delay. The delay time is set to a length of
one eighth note.
Stereo Delay2
This is a stereo delay. The delay time is set to a length of
one quarter-note triplet.
Stereo Delay3
This is a stereo delay. The delay time is set to a length of
one dotted eighth note.
Stereo Delay4
This is a stereo delay. The delay time is set to a length of
one quarter note.
Stereo Delay5
This is a stereo delay. The delay time is set to a length of
one half note.
Monaural Delay This is a monaural delay.
Modulation Delay Adds modulation to the delayed sound.
Triple Tap Delay Produces three delay sounds; center, left and right.
3D Delay This applies a 3D effect to the delay sound.
Tape Echo
A virtual tape echo that produces a realistic tape delay
sound.
Reverse Delay
This is a reverse delay that adds a reversed and delayed
sound to the input sound.
Lo-Fi
This is an effect that intentionally degrades the sound
quality for creative purposes.
Telephone This applies a telephone sound.
Gate Reverb
This is a special type of reverb in which the reverberant
sound is cut off before its natural length.
Overdrive ->
Chorus
This effect connects an overdrive and a chorus in series.
Overdrive ->
Flanger
This effect connects an overdrive and a flanger in series.
Overdrive ->
Delay
This effect connects an overdrive and a delay in series.
Distortion ->
Chorus
This effect connects an distortion and a chorus in series.
Distortion ->
Flanger
This effect connects an distortion and a flanger in series.
Distortion ->
Delay
This effect connects an distortion and a delay in series.
Enhancer ->
Chorus
This effect connects an enhancer and a chorus in series.
Enhancer ->
Flanger
This effect connects an enhancer and a flanger in series.
Enhancer -> Delay This effect connects an enhancer and a delay in series.
Chorus -> Delay This effect connects a chorus and a delay in series.
Flanger -> Delay This effect connects a flanger and a delay in series.
Chorus -> Flanger This effect connects a chorus and a flanger in series.
Damper
Resonance
On an acoustic piano, holding down the damper pedal
allows other strings to resonate in sympathy with the
notes you play, creating rich and spacious resonances.
This effect simulates these damper resonances.
Effect Type Explanation
RM-700_e.book 217 ページ ２００９年３月１８日 水曜日 午前１１時５分