Roland RM-700 - Manual (Page 140)

141
Recording and Saving the Performance
Start Recording
7. Press the [ (Play/Stop)] button.
When recording starts, the [ (Play/Stop)] and [ (Rec)] buttons’ indicators light up.
Stop Recording
8. Press the [ (Play/Stop)] button.
Recording will stop, and the “Rename” screen appears.
* If you don’t need to change the name of the song, proceed to step 11.
9. Touch to move the cursor.
10. Enter the desired characters.
11. When you’ve specified the desired name, touch .
The recorded song will be saved to USB memory.
Play Back the Recorded Performance
12. Press the [Song] button so its indicator is lit.
The Song selection screen appears.
13. Touch , and then select the song that you recorded.
14. Press the [ (Play/Stop)] button.
The recorded performance is played back. When you press the [ (Play/Stop)] button, playback stops.
Icon Explanation
< ABC >–< YZ >
Enters a character at the cursor location.
For example, each time you touch the icon, the character to be entered will cycle in the order of A
→ B → C → A...
< A–0 > Switches between entering letters and numbers.
< Del > Delete the character at the cursor position.
RM-700_e.book 141 ページ ２００９年３月１８日 水曜日 午前１１時５分