Changing the recording method (rec mode) – Roland RM-700 User Manual
Page 158
159
Creating and Editing Songs
You can use any of the four methods below to record with the RM-
700. Although you will normally be using “Replace Recording,”
where previously recorded material is erased when new sounds are
recorded, you’ll find that you can record songs easily by using this
method in combination with other recording methods.
Immediately after the power is turned on, Replace Recording is
selected.
This is the normal method for recording. New material is recorded as
previously recorded material is erased.
New notes are recorded on top of notes previously recorded.
This convenient feature makes it easy for you to record melodies
over prerecorded accompaniment.
Specified measures are recorded repeatedly, while new notes are
combined with existing music. A convenient feature for creating
rhythm parts. Loop Recording allows you to record over and over
within a selected segment, adding a different percussion sound
with each pass.
You can re-record only a specified passage as you listen to a
recorded performance.
Changing the Recording Method
1.
Press the [Menu] button so its indicator is lit.
2.
Touch
* The Menu screen for Settings contains five screen pages.
Touch
to switch between the pages.
3.
Touch
The “Composer” screen appears.
4.
Touch
to select the recording mode.
5.
Press the [Exit] button when you’ve finished making
settings.
The recording process where previous material is erased as new
material is recorded is called “replace recording.” This setting is in
effect when you turn on the power.
1.
In the “Rec Mode,” select
2.
Record the performance using the procedures described
in p. 125–p. 131, “Multitrack Recording with 16 Parts (16-
Changing the Recording Method
(Rec Mode)
Display
Recording Method
Replace
Replace Recording
Mix
Mix Recording
Loop
Loop Recording
Auto Punch-In/Out
Punch-in recording of the interval between set
markers.
Manual
Punch-In/Out
Punch-in recording starting from the point at
which the pedal or the [
(Rec)] button is
pressed.
For more about Punch In Recording, refer to p.
161.
Tempo
You can add tempo changes to a recorded
composition. Refer to p. 169.
Recording While Erasing the Previous
Recording (Replace Recording)
RM-700_e.book 159 ページ ２００９年３月１８日 水曜日 午前１１時５分