Roland RM-700 - Manual (Page 188)

189
Various Settings
When you’ve finished calibrating the position, the following screen
appears.
6. Touch .
The settings will be written, and you will return to the Menu screen
for settings.
If you turn off the power without writing the settings, the
calibration settings will be cancelled.
Five choices are available for the language used in displaying
information on the screen.
1. Press the [Menu] button so its indicator is lit.
2. Touch .
* The Menu screen for Settings contains five screen pages.
Touch to switch between the pages.
3. Touch .
The “Language” screen appears.
4. Touch to select the language.
If you touch , the currently selected setting
(parameter) will return to its factory setting.
5. Press the [Exit] button when you’ve finished making
settings.
Normally, the various settings revert to their default values when
the power is turned off. However, you can specify that the settings
will be remembered even when the power is turned off.
This function is called “Memory Backup.”
For more on the settings stored using Memory Backup, refer to
“Parameters Stored in Memory Backup” (p. 225).
1. Press the [Menu] button so its indicator is lit.
2. Touch .
* The Menu screen for Settings contains five screen pages.
Touch to switch between the pages.
3. Touch .
The “Memory Backup” screen appears.
4. Touch .
The confirmation message appears on screen.
* If you decide to cancel the memory backup, touch .
5. Touch .
The settings will be stored, and you will return to the Settings Menu
screen.
• Never turn off the power while the “Executing...” indication is
shown.
Changing the Language (Language)
Setting
English, French, German, Japanese, Spanish
Remembering the Settings Even
When the Power is Turned Off
(Memory Backup)
RM-700_e.book 189 ページ ２００９年３月１８日 水曜日 午前１１時５分