Roland RM-700 - Manual (Page 153)

154
Saving Your Performance Settings (User Program)
Specifying the Copy Destination
8. Touch to select the copy destination for
the set of user programs.
Where there is a name shown for a number, it means that there is a
user program set stored there.
If you select a number with user programs data, and then copy data
to that number, the previously saved user programs are deleted. If
you do not want to delete the saved user programs, select a number
in the save-destination column for which no name is displayed.
9. Touch .
The set of user programs on the USB memory is saved to user
memory.
• Never disconnect the USB memory or turn off the power while the
“Copying...” indication is shown.
You can take user program sets saved in user memory and copy
them to USB memory.
In this case, in the Copy user programs screen in Step 7 above, touch
the large arrow icon in the center to get the arrow to point up.
This sets the RM-700 to copy the user program set in the user
memory to the USB memory.
The rest of the procedure is identical to that used for copying sets of
user program set from USB memory to user memory.
1. Press the [User Program] button so its indicator is lit.
The User Program selection screen appears.
2. Touch .
The following screen appears.
* There are two setting screen. Touch to switch screens.
3. To change the setting, touch for the item you
want to specify.
If you touch , the currently selected setting
(parameter) will return to its factory setting.
4. Press the [Exit] button when you’ve finished making
settings.
You can assign the function of the sequential switching of the “user
programs” to the pedal. That way, each time you depress the pedal,
the RM-700 switches to the next user program.
Great for use in concerts and similar situations, this allows you to
prepare and save your user programs in the sequence they are to be
used, and then call up user programs in the appropriate order while
you perform, simply by depressing the pedal.
Coping Sets of User Programs Stored in the
User Memory to USB Memory
User Program Settings
Using the Pedal to Switch User Programs
(Pedal Shift)
Display Explanation
Off You can use a function assigned to the pedal.
Left Pedal
The left pedal is dedicated to switching user
programs.
The function assigned to the left pedal cannot be
used.
Center Pedal
The center pedal is dedicated to switching user
programs.
The function assigned to the center pedal cannot be
used.
RM-700_e.book 154 ページ ２００９年３月１８日 水曜日 午前１１時５分