beautypg.com

Adjusting the volume, Connecting headphones, Raise the adjusters on the stand (p. 22) – Roland RM-700 User Manual

Page 21: Adjusts the overall volume (p. 22), Two headphones simultaneously (p. 22), Use the [volume] knob to adjust the volume (p. 22)

background image

22

Before You Start Playing

About the Adjuster

When you move the RM-700 or if you feel that the pedals are

unstable, adjust the adjuster located below the pedals as follows.

• Rotate the adjuster to lower it so that it is in firm contact with the

floor. If there is a gap between the pedals and the floor, the pedals

may be damaged. In particular when placing the instrument on

carpet, adjust this so that the pedals firmly contact the floor.

Here’s how to adjust the overall volume

If headphones are connected, use the [Volume] knob to adjust the

headphone volume.

1.

Turn the [Volume] knob to adjust the overall volume.

• You can also use the remote control to adjust the volume. Refer to

“Button Functions” (p. 84).

• Even if the [Volume] knob is raised, you won’t hear any sound if the

volume has been set to “0” using the remote’s VOLUME [-] [+]

buttons or if the [MUTE] button was pressed.

You can use headphones to enjoy the RM-700 without disturbing

those around you, such as at night. Since the RM-700 has two

headphone jacks, two people can also use headphones

simultaneously.

If you’re using only one set of headphones, you may connect them

to either of the two headphone jacks.

1.

Plug the headphones into the Phones jack located at the

bottom left of the piano.

If headphones are connected, no sound will be output from the RM-

700’s speakers.

2.

Use the RM-700’s [Volume] knob to adjust the

headphone volume.

• If the Twin Piano mode is set to “Individual,” separate sounds will be

heard from each Phones jack (p. 105).

• Use Stereo headphones.

• To prevent damage to the cord’s internal conductors, avoid rough

handling. When using headphones, mainly try to handle either the

plug or the headset.

• Your headphones may be damaged if the volume of a device is

already turned up when you plug them in. Minimize the volume

before you plug in the headphones.

• Excessive input will not only damage your hearing, but may also

strain the headphones. Please enjoy music at an appropriate

volume.

Adjusting the Volume

Adjuster

Connecting Headphones

RM-700_e.book 22 ページ 2009年3月18日 水曜日 午前11時5分