Roland Classic Organ C-380 - Manual (Page 84)

84
Troubleshooting
Can’t record
Performance functions don’t work properly
Other
Sounds or settings have changed since you turned on the power.
Symptom Cause Response Page
The recorded performance data was lost
The recorded performance will be lost when you switch off the
C-330/C-380’s power.
The lost performance data cannot be
recovered.
Save your performance to internal
memory or USB memory before you
turn off the power.
p. 57
Symptom Cause Response Page
Expression pedal does not work
The keyboard to be affected by the expression pedal has not
been set. Specify the keyboard that is to be
affected by the expression pedal.
p. 42
Can’t use the function assigned to a kick
switch
The kick switch function has not been set correctly. Correctly set the kick switch function. p. 45
Symptom Cause Response Page
Can’t read or write USB memory You’re using USB memory not manufactured by Roland.
We cannot guarantee operation if USB
memory not manufactured by Roland is
used.
Use USB memory available from Roland.
—
Symptom Cause Response Page
The sound heard when you press a
tablet has changed The voice palette that was in effect when you turned on the
power has been changed. Re-select the voice palette and store it in
the C-330/C-380.
p. 73
Reverb or tremulant settings have
changed The reverb or tremulant settings that were in effect when you
turned on the power have been changed.
Re-select the reverb or tremulant
settings, and store them in the C-330/
C-380.
p. 73
The expression pedal function or the
bass or melody coupler split point have
been changed
The settings were changed since the power was turned on.
Re-select the settings, and store them in
the C-330/C-380.
p. 73
C-380_330_e.book 84 ページ ２０１０年４月２８日 水曜日 午後１０時１１分