Roland Classic Organ C-380 - Manual (Page 61)

61
Recording Your Performances
Never disconnect the USB memory or turn off the power before the copy has been completed. Otherwise, you risk damaging the
USB memory or the organ’s internal memory, rendering it unusable.
9. When copying is finished, the song name will change to the copy-source song name.
10. Press the [Value/Exit Menu] knob twice to return to the main screen.
If you want to name the data you’re saving
You can assign a name to the performance data (p. 57), memory banks (p. 62), and voice setup data (p. 65).
1. At the “Name” item, press the [Select/Menu] knob.
In the case of performance data:
In the case of memory banks:
In the case of voice setup data:
2. Turn the [Select/Menu] knob to move the cursor to left or right, and turn the [Value/Exit Menu] knob
to change the character at the cursor location.
fig.LCD956.eps
3. Press the [SET] piston to finalize the name.
You can use the following characters.
Operation Explanation
Press [M–] piston Deletes a character.
Press [M+] piston Inserts a space.
(space)
C-380_330_e.book 61 ページ ２０１０年４月２８日 水曜日 午後１０時１１分