Using the bass coupler, Using the bass coupler” (p. 33) – Roland Classic Organ C-380 User Manual
Page 33
33
Performing
The bass coupler allows you to layer the sound of a PEDAL division onto the lowest note you’re fingering on the lower keyboard.
1.
Press the bass coupler [BASS] piston.
When the bass coupler is on, the piston’s indicator will light.
Press the piston once again to turn off the indicator.
Changing the range of the bass coupler
You are free to change the range in which the bass coupler will operate. The specified note and those below it will use the bass
coupler.
fig.cap-BA-key.eps
1.
From the main screen, press the [Select/Menu] knob.
2.
Turn the [Select/Menu] knob to select “6 Console.”
fig.LCD007.eps
3.
Press the [Select/Menu] knob to access the “Console” screen.
You can also access the “Console” screen from the main screen by holding in the [SET] piston and pressing the [BASS] piston.
4.
Turn the [Select/Menu] knob to select “Bass Split.”
fig.LCD019.eps
5.
Turn the [Value/Exit Menu] knob to change the setting.
6.
Press the [Value/Exit Menu] knob twice to return to the main screen.
This setting will return to OFF when you turn off the power, but you can store the setting so that it will be remembered even
after the power is turned off. For details, refer to “Storing Your Settings (Customize)” (p. 73).
Using the Bass Coupler
Top key of the Bass coupler range
Bass coupler
C-380_330_e.book 33 ページ ２０１０年４月２８日 水曜日 午後１０時１１分