Roland Classic Organ C-380 - Manual (Page 34)

34
Performing
You can adjust the volume or reverberation that is heard when you play the keyboards or when you play back a song from internal
memory or USB memory.
When you’re in the main screen, turning any of the following knobs will cause the “VOLUME” screen to appear for a while.
fig.Volume-Tone.eps
1. Turn the [Master Volume] knob to adjust the overall volume.
Adjust the volume while you’re playing the keyboard to produce sound.
Turning the knob toward the right will increase the volume, and turning it toward the left will decrease the volume.
It’s best to lower the satellite speaker volume before adjusting the overall volume. Adjusting the volume balance is easier if
you start by specifying the volume of the bass sound heard from the main unit itself, and then adjust the volume of the
satellite speakers.
1. From the main screen, turn the [Satellite Volume] knob (Select/Menu) to adjust the volume of the satellite
speakers.
Adjust the volume while you’re playing the keyboard to produce sound.
Turning the knob toward the right will increase the volume, and turning it toward the left will decrease the volume.
The volume of the satellite speakers (the setting of the [Satellite Volume] knob) is linked with the overall volume (the setting of
the [Master Volume] knob).
This setting will return to the default value when you turn off the power, but you can store the setting so that it will be
remembered even after the power is turned off. For details, refer to “Storing Your Settings (Customize)” (p. 73).
1. Turn the [Reverb] knob to adjust the amount of reverberation.
You can also change the type of reverberation as desired (p. 35).
Adjusting the Volume and Reverberation
Adjusting the Overall Volume
Range
0–127
Adjusting the Volume of the Satellite Speakers
Range
0–127
Adjusting the Reverberation
Range
0–127
Volume of
Satellite Speakers
Master Volume Reverberation
“Volume” screen
C-380_330_e.book 34 ページ ２０１０年４月２８日 水曜日 午後１０時１１分