Using the kick switches – Roland Classic Organ C-380 User Manual
Page 45
45
Performing
Two kick switches are located on the sides of the expression pedal. You can assign a different function to each of these two kick
switches.
fig.foot-switch.eps
1.
From the main screen, press the [Select/Menu] knob.
2.
Turn the [Select/Menu] knob to select “8 Exp. Pedal.”
fig.LCD009.eps
3.
Press the [Select/Menu] knob to access the “Exp. Pedal” screen.
You can also access the “Exp. Pedal” screen from the main screen by holding in the [SET] piston and operating the
expression pedal.
4.
Turn the [Select/Menu] knob to select “Kick SW R” (right kick switch) or “Kick SW L” (left kick switch).
fig.LCD031.eps
5.
Turn the [Value/Exit Menu] knob to adjust the value.
6.
Press the [Value/Exit Menu] knob twice to return to the main screen.
This setting will return to “OFF” when you turn off the power, but you can store the setting so that it will be remembered
Using the Kick Switches
Assignable function
Explanation
OFF
The kick switch will be off.
NEXT
This has the same function as the [NEXT] piston.
It will switch to the adjacent general memory piston. Each time you press the kick
switch, the general memory piston will switch to the next higher number.
PREV
This has the same function as the C-380’s [PREV] piston.
It will switch to the adjacent general memory piston. Each time you press the kick
switch, the general memory piston will switch to the next lower number.
SUSTAIN
Sustain will be applied while you are pressing the switch.
* Sustain can be applied only to some of the [USER/MIDI] coupler sounds and to the
sounds of an external MIDI sound module.
* Sustain will not be applied to the sounds of the organ.
C-380_330_e.book 45 ページ ２０１０年４月２８日 水曜日 午後１０時１１分