Roland Classic Organ C-380 - Manual (Page 42)

42
Performing
You can use the expression pedal to adjust the volume of the organ. Depressing the expression pedal will increase the volume, while
releasing it will reduce the volume.
fig.ex-pedal.eps
The volume will not decrease to zero even when you completely release the expression pedal. If you want to set the volume to
zero, turn the [Master Volume] knob to the Min (minimum) position.
You can also specify which divisions will be affected by the expression pedal.
1. From the main screen, press the [Select/Menu] knob.
2. Turn the [Select/Menu] knob to select “8 Exp. Pedal.”
fig.LCD009.eps
3. Press the [Select/Menu] knob to access the “Exp. Pedal” screen.
You can also access the “Pedal” screen from the main screen by holding in the [SET] piston and operating the expression
pedal.
4. Turn the [Select/Menu] knob to select “MAN-I/PEDAL” (MAN I division and PEDAL division) or “MAN-II” (MAN II
division).
fig.LCD029.eps
5. Turn the [Value/Exit Menu] knob to switch the pedal setting.
6. Press the [Value/Exit Menu] knob twice to return to the main screen.
This setting will return to “OFF” when you turn off the power, but you can store the setting so that it will be remembered
even after the power is turned off. For details, refer to “Storing Your Settings (Customize)” (p. 73).
Using the Expression Pedal to Adjust the Volume of the Organ
Specifying the Divisions Affected by the Expression Pedal
Indication Division
ON Affected by the pedal
OFF Not affected by the pedal
Decrease the volume
Increase the volume
C-380_330_e.book 42 ページ ２０１０年４月２８日 水曜日 午後１０時１１分