Roland Classic Organ C-380 - Manual (Page 48)

48
Storing a Combination of Stops
The state of the general memory [1]–[5] pistons and the division memory [1]–[5] pistons (C-380 only) can be stored as a “memory
bank.”
You can use twenty memory banks (M01–M20). This allows you to store a total of one hundred registrations (5 x 20).
fig.piston-1.eps
1. Use the memory bank select [M–]/[M+] pistons to select the memory bank number to be used for storage.
fig.LCD951.eps
2. While holding the [SET] piston, press one of the general memory pistons or division memory pistons (C-380
only).
• If you press a general memory [1]–[5] piston, the current settings of the general memory [1]–[5] pistons will be stored in the bank.
• If you press a MAN I division memory [1]–[5] piston, the current settings of the MAN I division memory [1]–[5] pistons will be stored in
the bank.
• If you press a MAN II division memory [1]–[5] piston, the current settings of the MAN II division memory [1]–[5] pistons will be stored in
the bank.
Please be aware that the information that was previously stored in the memory bank will be overwritten and lost.
Using Memory Banks
Storing the Combination of Memory Pistons as a Memory Bank
M02
M20
M01
Number of memory bank
C-380_330_e.book 48 ページ ２０１０年４月２８日 水曜日 午後１０時１１分