Roland Classic Organ C-380 - Manual (Page 67)

67
Saving and Loading Settings on USB Memory
1. If you want to deleting a voice setup from USB memory,
connect your USB memory to the external memory
connector (p. 26).
2. From the main screen, press the [Select/Menu] knob.
3. Turn the [Select/Menu] knob to select “11 Save/Load
(USB).”
fig.LCD012.eps
4. Press the [Select/Menu] knob to access the “Save/Load
(USB)” screen.
5. Turn the [Select/Menu] knob to select “Delete Voice
Setup.”
fig.LCD056.eps
6. Press the [Select/Menu] knob to access the “Delete Voice
Setup” screen.
7. Turn the [Select/Menu] knob to select “Delete from,” and
turn the [Value/Exit Menu] knob to choose the location of
the voice setup you want to delete.
fig.LCD064.eps
8. Turn the [Select/Menu] knob to select “No.” field, and
turn the [Value/Exit Menu] knob to select the voice setup
that you want to delete.
9. Press the [SET] piston to delete the voice setup.
A confirmation screen will appear.
If you decide to cancel, press the [Value/Exit Menu] knob.
fig.LCD959.eps
10. Press the [SET] piston; the voice setup will be deleted.
Never disconnect the USB memory or turn off the power until
the voice setup have been deleted.
Deleting a Voice Setup
Setting Explanation
INTERNAL A voice setup in the organ’s internal memory
USB A voice setup saved on USB memory.
C-380_330_e.book 67 ページ ２０１０年４月２８日 水曜日 午後１０時１１分