Roland Classic Organ C-380 - Manual (Page 66)

66
Saving and Loading Settings on USB Memory
9. Turn the [Select/Menu] knob to select the “Name” field,
and press the [Select/Menu] knob to assign a name to the
voice setup you want to save.
For details on how to assign a name, refer to “If you want to name
the data you’re saving” (p. 61).
fig.LCD092.eps
10. Turn the [Select/Menu] knob to select the “No.” field, and
turn the [Value/Exit Menu] knob to choose the desired
save-destination number.
If you don’t want to overwrite an existing voice setup, choose a save
destination that’s indicated as “Empty.”
If you decide to cancel, press the [Value/Exit Menu] knob.
11. Press the [SET] piston.
The currently used voice setup will be saved to USB memory.
To prevent malfunction, never disconnect the USB memory or
turn off the power while a voice setup is being saved to USB
memory.
12. Press the [Value/Exit Menu] knob three times to return to
the main screen.
1. If you want to load a voice setup from USB memory,
connect your USB memory to the external memory
connector (p. 26).
2. From the main screen, press the [Select/Menu] knob.
3. Turn the [Select/Menu] knob to select “11 Save/Load
(USB).”
fig.LCD012.eps
4. Press the [Select/Menu] knob to access the “Save/Load
(USB)” screen.
5. Turn the [Select/Menu] knob to select “Load Voice
Setup.”
fig.LCD653.eps
6. Press the [Select/Menu] knob to access the “Load Voice
Setup” screen.
7. Turn the [Select/Menu] knob to select the “Load from”
field, and turn the [Value/Exit Menu] knob to choose the
location of the voice setup you want to use.
fig.LCD069.eps
8. Turn the [Select/Menu] knob to select “No.”
9. Turn the [Value/Exit Menu] knob to select the name of
the voice setup that you want to use.
* If you selected “FACTORY,” there will be only one voice setup.
10. Press the [SET] piston.
The following screen will appear.
If you decide to cancel, press the [Value/Exit Menu] knob.
fig.LCD961.eps
11. Press the [SET] piston.
The organ’s voice setup will switch to the voice setup you loaded.
* This setting will return to the default value when you turn off the
power, but you can store the setting so that it will be remembered
even after the power is turned off. For details, refer to “Storing Your
Settings (Customize)” (p. 73).
To prevent malfunction, never turn off the power while the
voice setup is being switched.
Loading a Voice Setup
Setting Explanation
FACTORY The factory-set voice setup
INTERNAL A voice setup in the organ’s internal memory
USB A voice setup saved on USB memory.
C-380_330_e.book 66 ページ ２０１０年４月２８日 水曜日 午後１０時１１分