Nortel Networks ALTEON OS BMD00007 - Manual (Page 97)

Alteon OS Command Reference
The Information Menu „ 97 BMD00007, November 2007
/info/l3/route
IP Routing Information
Using the commands listed below, you can display all or a portion of the IP routes currently
held in the switch.
[IP Routing Menu]
find - Show a single route by destination IP address
gw - Show routes to a single gateway
type - Show routes of a single type
tag - Show routes of a single tag
if - Show routes on a single interface
dump - Show all routes
Table 4-23 Route Information Menu Options (/info/l3/route)
Command Syntax and Usage
find
Displays a single route by destination IP address.
gw
Displays routes to a single gateway.
type indirect|direct|local|broadcast|martian|multicast
Displays routes of a single type. For a description of IP routing types, see Table 4-24 on page 98 .
tag fixed|static|addr|rip|ospf|bgp|broadcast|martian|multicast
Displays routes of a single tag. For a description of IP routing types, see Table 4-25 on page 99 .
if
Displays routes on a single interface.
dump
Displays all routes configured in the switch. For more information, see page 98 .