Nortel Networks ALTEON OS BMD00007 - Manual (Page 305)

Alteon OS Command Reference
The Configuration Menu „ 307 BMD00007, November 2007
/cfg/l3/vrrp/if
VRRP Interface Configuration
N OTE – The interface-number (1 to 127) represents the IP interface on which authentication
parameters must be configured.
This menu is used for configuring VRRP authentication parameters for the IP interfaces used
with the virtual routers.
[VRRP Interface 1 Menu]
auth - Set authentication types
passw - Set plain-text password
del - Delete interface
cur - Display current VRRP interface configuration
Table 6-98 VRRP Interface Menu Options (/cfg/l3/vrrp/if)
Command Syntax and Usage
auth none|password
Defines the type of authentication that will be used: none (no authentication), or password
(password authentication).
passw
Defines a plain text password up to eight characters long. This password will be added to each
VRRP packet transmitted by this interface when password authentication is chosen (see auth
above).
del
Clears the authentication configuration parameters for this IP interface. The IP interface itself is
not deleted.
cur
Displays the current configuration for this IP interface’s authentication parameters.