Nortel Networks ALTEON OS BMD00007 - Manual (Page 201)

Alteon OS Command Reference
The Configuration Menu „ 203 BMD00007, November 2007
/cfg/sys/ssnmp/snmpv3/taddr
SNMPv3 Target Address Table Configuration
This command is used to configure the target transport entry. The configured entry is stored in
the target address table list in the SNMP engine. This table of transport addresses is used in the
generation of SNMP messages.
[SNMPv3 snmpTargetAddrTable 1 Menu]
name - Set target address name
addr - Set target transport address IP
port - Set target transport address port
taglist - Set tag list
pname - Set targetParams name
del - Delete targetAddrTable entry
cur - Display current targetAddrTable configuration
Table 6-16 Target Address Table Menu Options (/cfg/sys/ssnmp/snmpv3/taddr)
Command Syntax and Usage
name <32 character name>
Allows you to configure the locally arbitrary, but unique identifier, target address name associated
with this entry.
addr
Allows you to configure a transport address IP that can be used in the generation of SNMP traps.
port
Allows you to configure a transport address port that can be used in the generation of SNMP traps.
taglist
Allows you to configure a list of tags that are used to select target addresses for a particular opera-
tion.
pname <32 character name>
Defines the name as defined in /cfg/sys/ssnmp/snmpv3/tparam/name on page 204 .
del
Deletes the Target Address Table entry.
cur
Displays the current Target Address Table configuration.