Nortel Networks ALTEON OS BMD00007 User Manual
Page 192
Alteon OS Command Reference
194
The Configuration Menu
BMD00007, November 2007
Table 6-9 System SNMP Menu Options (/cfg/sys/ssnmp)
Command Syntax and Usage
snmpv3
Displays SNMPv3 menu. To view menu options, see
.
name
Configures the name for the system. The name can have a maximum of 64 characters.
locn
Configures the name of the system location. The location can have a maximum of 64 characters.
cont
Configures the name of the system contact. The contact can have a maximum of 64 characters.
rcomm
Configures the SNMP read community string. The read community string controls SNMP “get”
access to the switch. It can have a maximum of 32 characters. The default read community string is
public.
wcomm
Configures the SNMP write community string. The write community string controls SNMP “set”
and “get” access to the switch. It can have a maximum of 32 characters. The default write commu-
nity string is private.
trsrc
<1-128>
Configures the source interface for SNMP traps.
timeout
<1-30>
Set the timeout value for the SNMP state machine, in minutes.
auth disable|enable
Enables or disables the use of the system authentication trap facility. The default setting is dis-
abled.
linkt
Enables or disables the sending of SNMP link up and link down traps. The default setting is
enabled.
cur
Displays the current SNMP configuration.