Nortel Networks ALTEON OS BMD00007 - Manual (Page 254)

Alteon OS Command Reference
256 „ The Configuration Menu BMD00007, November 2007
/cfg/l3/gw
Default Gateway Configuration
N OTE – The switch can be configured with up to 4 gateways. Gateway 4 is reserved for
management.
This option is disabled by default.
del
Removes this IP interface.
cur
Displays the current interface settings.
[Default gateway 1 Menu]
addr - Set IP address
intr - Set interval between ping attempts
retry - Set number of failed attempts to declare gateway DOWN
arp - Enable/disable ARP only health checks
ena - Enable default gateway
dis - Disable default gateway
del - Delete default gateway
cur - Display current default gateway configuration
Table 6-57 Default Gateway Menu Options (/cfg/l3/gw)
Command Syntax and Usage
addr
Configures the IP address of the default IP gateway using dotted decimal notation.
intr <0-60 seconds>
The switch pings the default gateway to verify that it’s up. The intr option sets the time between
health checks. The range is from 0 to 60 seconds. The default is 2 seconds.
retry
Sets the number of failed health check attempts required before declaring this default gateway
inoperative. The range is from 1 to 120 attempts. The default is 8 attempts.
arp disable|enable
Enables or disables Address Resolution Protocol (ARP) health checks. This command is disabled
by default.
Table 6-56 IP Interface Menu Options (/cfg/l3/if)
Command Syntax and Usage