Nortel Networks ALTEON OS BMD00007 - Manual (Page 262)

Alteon OS Command Reference
264 „ The Configuration Menu BMD00007, November 2007
/cfg/l3/rmap
Routing Map Configuration
N OTE – The map number (1-32) represents the routing map you wish to configure.
Routing maps control and modify routing information.
[IP Route Map 1 Menu]
alist - Access List number
aspath - AS Filter Menu
ap - Set as-path prepend of the matched route
lp - Set local-preference of the matched route
metric - Set metric of the matched route
type - Set OSPF metric-type of the matched route
prec - Set the precedence of this route map
weight - Set weight of the matched route
enable - Enable route map
disable - Disable route map
delete - Delete route map
current - Display current route map configuration
Table 6-64 Routing Map Menu Options (/cfg/l3/rmap)
Command Syntax and Usage
alist
Displays the Access List menu. For more information, see page 266 .
aspath
Displays the Autonomous System (AS) Filter menu. For more information, see page 267 .
ap [] []|none
Sets the AS path preference of the matched route. One to three path preferences can be configured.
lp <(0-4294967294)>|none
Sets the local preference of the matched route, which affects both inbound and outbound direc-
tions. The path with the higher preference is preferred.
metric <(1-4294967294)>|none
Sets the metric of the matched route.
type 1 | 2)> |none
Assigns the type of OSPF metric. The default is type 1.
„ Type 1—External routes are calculated using both internal and external metrics.
„ Type 2—External routes are calculated using only the external metrics. Type 1 routes have
more cost than Type 2.
„ none —Removes the OSPF metric.