Nortel Networks ALTEON OS BMD00007 - Manual (Page 290)

Alteon OS Command Reference
292 „ The Configuration Menu BMD00007, November 2007
/cfg/l3/igmp/mrouter
IGMP Static Multicast Router Configuration
Table 6-86 describes the commands used to configure a static multicast router.
N OTE – When you configure a static multicast router on a VLAN, the process of learning mul-
ticast routers is disabled for that VLAN.
ena
Enables the multicast router.
dis
Disables the multicast router.
del
Deletes the multicast router from IGMP Relay.
cur
Displays the current IGMP Relay multicast router parameters.
[Static Multicast Router Menu]
add - Add port as Multicast Router Port
rem - Remove port as Multicast Router Port
clear - Remove all Static Multicast Router Ports
cur - Display current Multicast Router configuration
Table 6-86 IGMP Static Multicast Router Menu Options (/cfg/l3/igmp/mrouter)
Command Syntax and Usage
add
Selects a port/VLAN combination on which the static multicast router is connected, and configures
the IGMP version (1, 2, or 3) of the multicast router.
remove
Removes a static multicast router from the selected port/VLAN combination.
clear
Clears all static multicast routers from the switch.
cur
Displays the current IGMP Static Multicast Router parameters.
Table 6-85 IGMP Relay Mrouter Menu Options (/cfg/l3/igmp/relay/mrtr)
Command Syntax and Usage