Nortel Networks ALTEON OS BMD00007 - Manual (Page 75)

Alteon OS Command Reference
The Information Menu „ 75 BMD00007, November 2007
stg
In addition to seeing if STG is enabled or disabled, you can view the following STG bridge infor-
mation:
„ Priority
„ Hello interval
„ Maximum age value
„ Forwarding delay
„ Aging time
You can also see the following port-specific STG information:
„ Port alias and priority
„ Cost
„ State
For details, see page 85 .
cist
Displays Common internal Spanning Tree (CIST) bridge information, including the following:
„ Priority
„ Hello interval
„ Maximum age value
„ Forwarding delay
You can also view port-specific CIST information, including the following:
„ Port number and priority
„ Cost
„ State
For details, see page 91 .
trunk
When trunk groups are configured, you can view the state of each port in the various trunk groups.
For details, see
page 93 .
vlan
Displays VLAN configuration information, including:
„ VLAN Number
„ VLAN Name
„ Status
„ Port membership of the VLAN
For details, see page 94 .
gen
Displays general Layer 2 information.
Table 4-12 Layer 2 Menu Options (/info/l2)
Command Syntax and Usage