Nortel Networks ALTEON OS BMD00007 - Manual (Page 288)

Alteon OS Command Reference
290 „ The Configuration Menu BMD00007, November 2007
/cfg/l3/igmp/relay
IGMP Relay Configuration
Table 6-85 describes the commands used to configure IGMP Relay.
dis
Disables IGMP version 3.
cur
Displays the current IGMP version 3 configuration.
[IGMP Relay Menu]
mrtr - Upstream Multicast Router Menu
add - Add VLAN(s) to downstream
rem - Remove VLAN(s) from downstream
clear - Remove all VLAN(s) from downstream
report - Set unsolicited report interval
ena - Enable IGMP Relay
dis - Disable IGMP Relay
cur - Display current IGMP Relay configuration
Table 6-84 IGMP Relay Menu Options (/cfg/l3/igmp/relay)
Command Syntax and Usage
mrtr
Displays the Upstream Multicast Router Menu. To view menu options, see page 291 .
add
Adds the VLAN to the list of IGMP Relay VLANs.
rem
Removes the VLAN from the list of IGMP Relay VLANs.
clear
Removes all VLANs from the list of IGMP Relay VLANs.
report <0-150>
Configures the interval between unsolicited Join reports sent by the switch, in seconds.
The default value is 10.
ena
Enables IGMP Relay.
Table 6-83 IGMP V3 Menu Options (/cfg/l3/igmp/snoop/igmpv3)
Command Syntax and Usage