Nortel Networks ALTEON OS BMD00007 - Manual (Page 190)

Alteon OS Command Reference
192 „ The Configuration Menu BMD00007, November 2007
/cfg/sys/ntp
NTP Server Configuration
This menu enables you to synchronize the switch clock to a Network Time Protocol (NTP)
server. By default, this option is disabled.
[NTP Server Menu]
prisrv - Set primary NTP server address
secsrv - Set secondary NTP server address
intrval - Set NTP server resync interval
on - Turn NTP service ON
off - Turn NTP service OFF
cur - Display current NTP configuration
Table 6-8 NTP Configuration Menu Options (/cfg/sys/ntp)
Command Syntax and Usage
prisrv
Prompts for the IP addresses of the primary NTP server to which you want to synchronize the
switch clock.
secsrv
Prompts for the IP addresses of the secondary NTP server to which you want to synchronize the
switch clock.
intrval
Specifies the interval, that is, how often, in minutes (1-2880), to re-synchronize the switch clock
with the NTP server.
on
Enables the NTP synchronization service.
off
Disables the NTP synchronization service.
cur
Displays the current NTP service settings.