Snmpv3 configuration, Snmpv3 configuration 195, Cfg/sys/ssnmp/snmpv3 snmpv3 configuration – Nortel Networks ALTEON OS BMD00007 User Manual
Page 193
Alteon OS Command Reference
The Configuration Menu
195
BMD00007, November 2007
/cfg/sys/ssnmp/snmpv3
SNMPv3 Configuration
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2
Framework by supporting the following:
a new SNMP message format
security for messages
access control
remote configuration of SNMP parameters
For more details on the SNMPv3 architecture please refer to RFC2271 to RFC2276.
[SNMPv3 Menu]
usm - usmUser Table menu
view - vacmViewTreeFamily Table menu
access - vacmAccess Table menu
group - vacmSecurityToGroup Table menu
comm - community Table menu
taddr - targetAddr Table menu
tparam - targetParams Table menu
notify - notify Table menu
v1v2 - Enable/disable V1/V2 access
cur - Display current SNMPv3 configuration
Table 6-10 SNMPv3 Configuration Menu Options (/cfg/sys/ssnmp/snmpv3)
Command Syntax and Usage
usm
This command allows you to create a user security model (USM) entry for an authorized user. You
can also configure this entry through SNMP. To view menu options, see
view
This command allows you to create different MIB views. To view menu options, see
access
This command allows you to specify access rights.
The View-based Access Control Model
defines a set of services that an application can use for checking access rights of the user.
You need access control when you have to process retrieval or modification request from
an SNMP entity. To view menu options, see
group
A group maps the user name to the access group names and their access rights needed to
access SNMP management objects. A group defines the access rights assigned to all
names that belong to a particular group. To view menu options, see